Krishn Kumar krishn.kumar@ge.com & | With over 13.5 years of progressive experience in the oil and gas industry, I have worked on a variety of projects involving fabrication, welding, NDT, and pre-commissioning. I specialise in STG piping, oil and water storage tank fabrication and installation, as well as turbine, generator, and condenser erection inspection. I received my CSWIP 3.1 (Welding Inspector) certification from TWI London in 2018. In addition, I am an ASNT Level II inspector in RT, PT, MT, UT, and VT. I am well-versed in codes, standards, and specifications, and I have a track record of ensuring that these requirements are met. My roles and responsibilities have included interpreting codes, standards, and specifications, approving welding procedures, witnessing welder and procedure approval tests, verifying compliance with appropriate standards and specifications, verifying parent material against documentation and markings, and ensuring welding consumables are correct. I've also performed pre-weld inspections, verified that preheating is being done correctly, provided in-process welding inspection and surveillance, and assisted with the creation of Inspection and Test Plans (ITPs). I am committed to quality control and have completed hydrotest I also have a B.Tech in Mechanical Engineering from Sridhar University in Rajasthan, India, and a Diploma in Mechanical Engineering from National Education Management and Technology Studies in Ahmadabad, India, in addition to my technical qualifications. I also have a Diploma in Quality Control & ISO 9001 2015 from the National Institute of Labour Education and Management in Chennai (2013) and a High School (X) diploma from the Uttar Pradesh Education Board in Allahabad (2004). I've worked with companies like UPRVUNL, NTPC, Technip KT, Jindal, IOCL, Engineers India Ltd, Reliance India Energy Ltd (REL), and Naftogaz India Ltd. I am currently employed by GE Power System India Pvt. Ltd. as a Site Quality Engineer on a project for the Jawaharpur Vidyut Utpadan Nigam Ltd.

Krishn Kumar

With over 13.5 years of progressive experience in the oil and gas industry, I have worked on a variety of projects involving fabrication, welding, NDT, and pre-commissioning. I specialise in STG piping, oil and water storage tank fabrication and installation, as well as turbine, generator, and condenser erection inspection. I received my CSWIP 3.1 (Welding Inspector) certification from TWI London in 2018. In addition, I am an ASNT Level II inspector in RT, PT, MT, UT, and VT. I am well-versed in codes, standards, and specifications, and I have a track record of ensuring that these requirements are met. My roles and responsibilities have included interpreting codes, standards, and specifications, approving welding procedures, witnessing welder and procedure approval tests, verifying compliance with appropriate standards and specifications, verifying parent material against documentation and markings, and ensuring welding consumables are correct. I've also performed pre-weld inspections, verified that preheating is being done correctly, provided in-process welding inspection and surveillance, and assisted with the creation of Inspection and Test Plans (ITPs). I am committed to quality control and have completed hydrotest I also have a B.Tech in Mechanical Engineering from Sridhar University in Rajasthan, India, and a Diploma in Mechanical Engineering from National Education Management and Technology Studies in Ahmadabad, India, in addition to my technical qualifications. I also have a Diploma in Quality Control & ISO 9001 2015 from the National Institute of Labour Education and Management in Chennai (2013) and a High School (X) diploma from the Uttar Pradesh Education Board in Allahabad (2004). I've worked with companies like UPRVUNL, NTPC, Technip KT, Jindal, IOCL, Engineers India Ltd, Reliance India Energy Ltd (REL), and Naftogaz India Ltd. I am currently employed by GE Power System India Pvt. Ltd. as a Site Quality Engineer on a project for the Jawaharpur Vidyut Utpadan Nigam Ltd.

Etah, Uttar Pradesh, India

*50 free lookup(s) per month.

No credit card required.

Krishn Kumar’s Emails [email protected]

Krishn Kumar’s Phone Numbers No phone number available.

Social Media

Krishn Kumar’s Location Etah, Uttar Pradesh, India

Krishn Kumar’s Expertise With over 13.5 years of progressive experience in the oil and gas industry, I have worked on a variety of projects involving fabrication, welding, NDT, and pre-commissioning. I specialise in STG piping, oil and water storage tank fabrication and installation, as well as turbine, generator, and condenser erection inspection. I received my CSWIP 3.1 (Welding Inspector) certification from TWI London in 2018. In addition, I am an ASNT Level II inspector in RT, PT, MT, UT, and VT. I am well-versed in codes, standards, and specifications, and I have a track record of ensuring that these requirements are met. My roles and responsibilities have included interpreting codes, standards, and specifications, approving welding procedures, witnessing welder and procedure approval tests, verifying compliance with appropriate standards and specifications, verifying parent material against documentation and markings, and ensuring welding consumables are correct. I've also performed pre-weld inspections, verified that preheating is being done correctly, provided in-process welding inspection and surveillance, and assisted with the creation of Inspection and Test Plans (ITPs). I am committed to quality control and have completed hydrotest I also have a B.Tech in Mechanical Engineering from Sridhar University in Rajasthan, India, and a Diploma in Mechanical Engineering from National Education Management and Technology Studies in Ahmadabad, India, in addition to my technical qualifications. I also have a Diploma in Quality Control & ISO 9001 2015 from the National Institute of Labour Education and Management in Chennai (2013) and a High School (X) diploma from the Uttar Pradesh Education Board in Allahabad (2004). I've worked with companies like UPRVUNL, NTPC, Technip KT, Jindal, IOCL, Engineers India Ltd, Reliance India Energy Ltd (REL), and Naftogaz India Ltd. I am currently employed by GE Power System India Pvt. Ltd. as a Site Quality Engineer on a project for the Jawaharpur Vidyut Utpadan Nigam Ltd.

Krishn Kumar’s Current Industry Ge Power

Krishn Kumar’s Prior Industry
Satnam Global Infraprojects | Raunaq Epc International | Tpsc | Ge Power

Not the Krishn Kumar you were looking for?

Find accurate emails & phone numbers for over 700M professionals.

Work Experience

Ge Power

Site Quality Engineer

Fri Feb 01 2019 00:00:00 GMT+0000 (Coordinated Universal Time) — Present

Tpsc

Senior Quality Engineer

Wed Jun 01 2016 00:00:00 GMT+0000 (Coordinated Universal Time) — Fri Feb 01 2019 00:00:00 GMT+0000 (Coordinated Universal Time)

Raunaq Epc International

Qa/Qc Engineer

Sun May 01 2011 00:00:00 GMT+0000 (Coordinated Universal Time) — Wed Jun 01 2016 00:00:00 GMT+0000 (Coordinated Universal Time)

Satnam Global Infraprojects

Qa/Qc Engineer

Fri Jun 01 2007 00:00:00 GMT+0000 (Coordinated Universal Time) — Sun May 01 2011 00:00:00 GMT+0000 (Coordinated Universal Time)

Skills

Languages

FAQ About Krishn Kumar

Krishn Kumar is located at
Etah, Uttar Pradesh, India

Krishn Kumar is a
With over 13.5 years of progressive experience in the oil and gas industry, I have worked on a variety of projects involving fabrication, welding, NDT, and pre-commissioning. I specialise in STG piping, oil and water storage tank fabrication and installation, as well as turbine, generator, and condenser erection inspection. I received my CSWIP 3.1 (Welding Inspector) certification from TWI London in 2018. In addition, I am an ASNT Level II inspector in RT, PT, MT, UT, and VT. I am well-versed in codes, standards, and specifications, and I have a track record of ensuring that these requirements are met. My roles and responsibilities have included interpreting codes, standards, and specifications, approving welding procedures, witnessing welder and procedure approval tests, verifying compliance with appropriate standards and specifications, verifying parent material against documentation and markings, and ensuring welding consumables are correct. I've also performed pre-weld inspections, verified that preheating is being done correctly, provided in-process welding inspection and surveillance, and assisted with the creation of Inspection and Test Plans (ITPs). I am committed to quality control and have completed hydrotest I also have a B.Tech in Mechanical Engineering from Sridhar University in Rajasthan, India, and a Diploma in Mechanical Engineering from National Education Management and Technology Studies in Ahmadabad, India, in addition to my technical qualifications. I also have a Diploma in Quality Control & ISO 9001 2015 from the National Institute of Labour Education and Management in Chennai (2013) and a High School (X) diploma from the Uttar Pradesh Education Board in Allahabad (2004). I've worked with companies like UPRVUNL, NTPC, Technip KT, Jindal, IOCL, Engineers India Ltd, Reliance India Energy Ltd (REL), and Naftogaz India Ltd. I am currently employed by GE Power System India Pvt. Ltd. as a Site Quality Engineer on a project for the Jawaharpur Vidyut Utpadan Nigam Ltd. Ge Power

Krishn Kumar currently works in the
Ge Power

Krishn Kumar specializes in
With over 13.5 years of progressive experience in the oil and gas industry, I have worked on a variety of projects involving fabrication, welding, NDT, and pre-commissioning. I specialise in STG piping, oil and water storage tank fabrication and installation, as well as turbine, generator, and condenser erection inspection. I received my CSWIP 3.1 (Welding Inspector) certification from TWI London in 2018. In addition, I am an ASNT Level II inspector in RT, PT, MT, UT, and VT. I am well-versed in codes, standards, and specifications, and I have a track record of ensuring that these requirements are met. My roles and responsibilities have included interpreting codes, standards, and specifications, approving welding procedures, witnessing welder and procedure approval tests, verifying compliance with appropriate standards and specifications, verifying parent material against documentation and markings, and ensuring welding consumables are correct. I've also performed pre-weld inspections, verified that preheating is being done correctly, provided in-process welding inspection and surveillance, and assisted with the creation of Inspection and Test Plans (ITPs). I am committed to quality control and have completed hydrotest I also have a B.Tech in Mechanical Engineering from Sridhar University in Rajasthan, India, and a Diploma in Mechanical Engineering from National Education Management and Technology Studies in Ahmadabad, India, in addition to my technical qualifications. I also have a Diploma in Quality Control & ISO 9001 2015 from the National Institute of Labour Education and Management in Chennai (2013) and a High School (X) diploma from the Uttar Pradesh Education Board in Allahabad (2004). I've worked with companies like UPRVUNL, NTPC, Technip KT, Jindal, IOCL, Engineers India Ltd, Reliance India Energy Ltd (REL), and Naftogaz India Ltd. I am currently employed by GE Power System India Pvt. Ltd. as a Site Quality Engineer on a project for the Jawaharpur Vidyut Utpadan Nigam Ltd.